These elements are used for the installation of luminaires on enclosures, facades and warehouse sides. The arm tilt angle regarding the horizontal one is adjusted in each case to the project demands.
The wall arm can also be mounted on columns or posts and its design adapted to technical or architectural needs.
BM1
MATERIAL: Steel or stainless steel AISI 316L.
GALVANISING: Hot-dip complying with UNE EN ISO 1461:2009.
FINISH: Option of painting with a colour chosen from the RAL chart, polished, brushed or blast.
OPTIONAL: Finished with a double layer of primer with a colour chosen from the RAL chart.
| LENGTH (mm) | DIAMETER (mm) | STANDARD CONFIGURATION |
|---|---|---|
| 500 | 33 | Straight with inclination 5º |
| 1000 | 33 | Curved with inclined end 15º |
| 1500 | 33 | Curved with inclined end 15º |
| 500 | 42 | Straight with inclination 5º |
| 1000 | 42 | Curved with inclined end 15º |
| 1500 | 42 | Curved with inclined end 15º |
| 2000 | 42 | Curved with inclined end 15º |
| 500 | 48 | Straight with inclination 5º |
| 1000 | 48 | Curved with inclined end 15º |
| 1500 | 48 | Curved with inclined end 15º |
| 2000 | 48 | Curved with inclined end 15º |
| 500 | 60 | Straight with inclination 5º |
| 1000 | 60 | Curved with inclined end 15º |
| 1500 | 60 | Curved with inclined end 15º |
| 2000 | 60 | Curved with inclined end 15º |
BM2
MATERIAL: Steel or stainless steel AISI 316L.
GALVANISING: Hot-dip complying with UNE EN ISO 1461:2009.
FIXATION: To wall:
U profile plate and screws.
To column:
Curved plate and pass-through bolts.
FINISH: Option of painting with a colour chosen from the RAL chart, polished, brushed or blast.
OPTIONAL: Finished with a double layer of primer with a colour chosen from the RAL chart.
| LENGTH (mm) | DIAMETER (mm) |
|---|---|
| 500 | 60/50 |
| 1000 | 60/50 |
BM3
MATERIAL: Steel.
GALVANISING: Hot-dip complying with UNE EN ISO 1461:2009.
FIXATION: To wall:
U profile plate and screws.
To column:
Curved plate and pass-through bolts.
FINISH: Option of painting with a colour chosen from the RAL chart, polished, brushed or blast.
OPTIONAL: Finished with a double layer of primer with a colour chosen from the RAL chart.
| LENGTH (mm) | DIAMETER (mm) |
|---|---|
| 2 | 168 |
| 2.5 | 168 |
| 3 | 168 |