COLUMN
SHAFT : Telescopic.
SECTION: Circular upper section, polygonal lower section.
MATERIAL: Carbon steel S 235 JR y S 275 JR in compliance with UNE EN 10025.
Produced according to regulation UNE EN 40-5.
GALVANISING: Hot-dip complying with UNE EN ISO 1461.
FINISH: Option of painting with a colour chosen from the RAL chart.
DOOR: Even or projecting with frame.
BASE: Flat plate and reinforced brackets.
HEIGHT: Up to 12 m.
COLUMN DIMENSIONS – MODEL MAGDALENA
Note: Dimensions to verify before manufacturing.
| MODEL | H (m) | W (m) | f (mm) | g (mm) | Bolts Ø y L |
|---|---|---|---|---|---|
| MAGDALENA | 8 | 2 | 550 | 650 | M-24×700 |
| MAGDALENA | 10 | 2 | 550 | 650 | M-24×700 |
| MAGDALENA | 12 | 2 | 550 | 650 | M-24×700 |